Upgrading JUNOS via USB
I borrowed this guide from Juniper but keeping it here incase i cannot find it going forward. You need to have a fat32 or smaller than 4gb partitioned USB flash disk. Enter the shell as root: user@switch> start shell user root Password: root@switch% Before inserting the USB device, perform the following: root@% ls /dev/da* /dev/da0 /dev/da0s1c /dev/da0s2a /dev/da0s3 /dev/da0s3e /dev/da0s1 /dev/da0s1f /dev/da0s2c /dev/da0s3c /dev/da0s1a /dev/da0s2 /dev/da0s2f /dev/da0s3d Insert the USB drive in the USB port. The following output will be displayed: root@% umass1: TOSHIBA TransMemory, rev 2.00/1.00, addr 3 da2 at umass-sim1 bus 1 target 0 lun 0 da2: <TOSHIBA TransMemory 5.00> Removable Direct Access SCSI-0 device da2: 40.000MB/s transfers da2: 983MB (2013184 512 byte sectors: 64H 32S/T 983C) root@% ls /dev/da* /dev/da0 /dev/da0s1c /dev/da0s2a /dev/da0s3 /dev/da0s3e /dev/da0s1 /dev/da0s1f /dev/da0s2c /dev/da0s3c /dev/da2 /dev/da0s1a /dev/da...